Wohler ARS-22B Manual de usuario descargar pdf (Pagina 5)

ARS Series User Guide

Installation Recommendations

Mounting

The unit is designed to install into a standard 19" rack mounted.

Heat Dissipation

The ambient temperature inside the mounting enclosure should not

exceed 40° Celsius (104° Fahrenheit). Adjacent devices can be rack

mounted (or stacked) in proximity to the unit if the above temperature

is not exceeded. Allow a 1RU (1.75”/44.45mm) space above and below

the unit for air circulation.

Power

The unit comes with a standard 24VDC/3.0A internal power supply

and connects an A/C mains power source (65W, 100 to 240 VAC, 50/

60Hz) to the IEC external power supply connector provided on the rear

panel of the unit.

Mechanical Bracing

The chassis is securely attached to the front panel at six points along its

surface, not just at the four corners of the chassis ears. This feature will

reduce or eliminate rear bracing requirements in most mobile/portable

applications. The weight of internal components is distributed fairly

evenly around the unit.

Electrical Interference

As with any audio equipment, maximum immunity from electrical

interference requires the use of shielded cable; however, satisfactory

results can sometimes be obtained without it.

Important:

As a safety precaution, we advise you to be sure to allow proper

ventilation on both sides of the unit.

1 2 3 4 5 6 7 8 9 10 11 12

Sin comentarios

Wohler ARS-22B Manual de usuario Pagina 5